What Causes Cracks to Appear in Tarmac?
Tarmac is a durable and practical surface, but it is not completely resistant to movement or deterioration. Cracks usually form when the surface is placed under more strain than it can accommodate or when the supporting layers beneath it begin to move.
A small crack does not necessarily mean that the entire driveway has failed. However, identifying why it developed is important because simply covering the opening may not provide a lasting repair. For property owners in Haverhill, Cambridgeshire, a professional assessment can distinguish ordinary surface ageing from a deeper construction or drainage problem.
Why Tarmac Surfaces Begin to Crack
Natural Ageing and Oxidation
The bitumen within tarmac binds the aggregate together and gives a newly laid surface its dark appearance. Exposure to air, sunlight and changing weather conditions gradually causes this binder to oxidise.
As tarmac ages, it can become lighter, drier and less flexible. The surface may then be more susceptible to fine cracking, particularly where it experiences regular vehicle movement.
An Inadequate Sub-Base
A tarmac driveway depends on a firm and correctly prepared sub-base. This supporting layer distributes vehicle loads and helps prevent the surface from moving.
If the sub-base is too shallow, formed from unsuitable material or inadequately compacted, sections of the driveway may settle unevenly. The tarmac above can then bend and crack because it is no longer receiving consistent support.
Poor Ground Preparation
Soft soil, organic material and unstable ground should be addressed before the driveway is constructed. If weak ground remains beneath the sub-base, gradual settlement may occur after the surface has been laid.
Signs of ground movement can include:
- Cracks accompanied by depressions
- Uneven or sunken sections
- Wheel tracks
- Cracks returning after repair
- Localised areas breaking apart
Repairing the surface alone may not be effective if the ground beneath it continues to move.
Water Entering Beneath the Surface
Water is a common contributor to tarmac deterioration. It can enter through small cracks, damaged edges or poorly sealed joints and affect the materials beneath.
Once support has been weakened or washed away, the surface may flex under vehicle loads and the original crack can become wider. Standing water can accelerate this process by keeping vulnerable areas repeatedly saturated.
Inadequate Drainage
A driveway should be formed with suitable levels so that rainfall moves towards the intended drainage points. Depressions, blocked channels or incorrect falls can cause water to collect on the surface.
Persistent pooling may highlight low areas created by settlement. It can also allow water to penetrate existing defects, turning minor cracks into more extensive damage.
Temperature Changes
Tarmac expands and contracts as temperatures change. A well-constructed surface can accommodate normal movement, but older or already weakened material may lose the flexibility required to do so.
Repeated changes can cause fine cracks to develop, particularly around joints, edges and areas where the surface thickness is inconsistent.
Heavy or Concentrated Vehicle Loads
Driveways should be constructed for the type and frequency of traffic they are expected to carry. Repeated loading in the same positions can place pressure on both the surface and sub-base.
Cracking may develop where vehicles regularly turn, brake or remain parked. If the supporting construction is insufficient, the damage may be accompanied by rutting, sinking or surface deformation.
Weak or Unsupported Edges
The centre of a driveway is supported by material on all sides, while the edges depend on secure restraints or a properly formed shoulder.
If edge support is inadequate, the tarmac can spread outwards and begin to crumble. Cracks may then run parallel to the boundary before gradually extending towards the centre of the driveway.
Tree Roots and Nearby Vegetation
Roots can lift or disturb the surface as they grow beneath or beside the driveway. The resulting cracks are often accompanied by raised areas or localised distortion.
Vegetation can also grow within an existing opening and make the damage more noticeable. Removing visible growth will not resolve the problem if movement below the surface continues.
Poorly Formed Joints
Joints are created where separate areas of tarmac meet or where new material connects with an existing surface. These areas must be prepared and compacted correctly to form a secure connection.
A weak joint can open under traffic or weather exposure, allowing water to reach the lower layers. Straight cracks following a join may indicate that the connection has begun to fail.
Movement Around Previous Excavations
Sections that have been disturbed for underground work may settle differently from the original driveway. If the backfilled material was not compacted thoroughly, a crack can develop around the repaired trench.
The correct repair may require the unstable section to be removed and rebuilt rather than repeatedly filling the visible opening.
What Different Crack Patterns Can Indicate
The position and shape of a crack can provide useful information about its cause:
- Fine surface cracks may relate to ageing and loss of flexibility
- Long edge cracks can indicate inadequate side support
- Cracks around depressions may suggest sub-base settlement
- Straight cracks may follow a construction joint or previous excavation
- Interconnected cracking can indicate wider structural deterioration
The pattern should always be considered alongside drainage, levels, traffic use and the condition of the surrounding surface.
Why Early Repairs Matter
An untreated crack creates a route for water and debris. Once moisture reaches the lower layers, movement can increase and the damaged area may begin to break apart.
Early repair can help preserve a driveway when the defect is localised and the supporting construction remains stable. The opening should be cleaned and treated with a method suited to its width, depth and cause.
When Filling a Crack Is Not Enough
Crack filling may be ineffective when the surface continues to move. Repeated cracking, sinking or widespread deformation usually indicates a problem beneath the tarmac.
In these circumstances, the affected section may need to be removed so that the sub-base, drainage or ground conditions can be corrected. Where cracking is widespread, resurfacing or reconstruction may provide a more appropriate solution.
Why a Professional Assessment Adds Value
A professional contractor will examine more than the visible opening. The assessment should consider:
- The crack pattern and depth
- Surface levels and drainage
- Edge support
- Evidence of ground movement
- Vehicle loading
- Previous repairs
- The stability of the surrounding tarmac
This helps determine whether the driveway needs a targeted repair or more substantial remedial work.
Conclusion
Cracks in tarmac can result from ageing, water ingress, poor ground preparation, inadequate sub-base support or repeated vehicle loading. Failed edges, weak joints and tree-root movement can also contribute.
The most effective repair addresses the cause as well as the visible damage. If cracks have appeared in your tarmac driveway in Haverhill, Cambridgeshire, contact Haverhill Driveways to arrange a professional assessment and receive practical advice on the most suitable next step.
Call us on: 01440 840 590
Click here to find out more about Haverhill Driveways
Click here to complete our contact form and see how we can help with your driveway needs.

